Webcam Function; Connection Of An External Monitor; Remote Control - Rollei 9s Plus Anleitung

Webcam Function

38
The Actioncam 9s Plus can also be used as a webcam . To do this, set the "USB" item in the settings menu to
"PCCAM", make sure you insert a microSD memory card and then connect the camera to your PC via USB .
As a webcam, the camera has a full HD resolution of 1920 x 1080 p and a frame rate of 30 fps .
Note: Please note that you need a separate microphone for audio transmissions, as the internal microphone
is not used for this function .
The compatibility of the camera as a webcam also depends on the program used .

Connection of an external Monitor

You can connect an external monitor via the micro HDMI port . You can use all resolutions of the camera as
resolution, as long as the monitor supports them .
Note: The camera does not support live online streaming .

Remote Control

You can operate the Actioncam remotely using the remote control supplied .
There are two triggers, one for photo mode (1) and one for video mode (2),
which take a photo or start and stop recording a video .
Radio frequency of the remote control: 2 .412 – 2 .472 GHz;
transmitting power: 10 dBm
Note: The remote control is not waterproof .
ENGLISH