Rollei 9s Plus Anleitung Seite 36

Settings
36
System settings:
– Power Frequency: Set the frequency of your ambient light to get the best results .
– Sounds: Here you can turn on and off the shutter sound, boot up sound, and key beep sound, and vary their
volume .
– White Balance: Set different white balance settings for optimal recordings . There is also a white balance for
underwater shots .
– Effects: Here you can apply various filters to your images .
– Distortion Calibration: Use this function to straighten out the distortion at the edge of the image caused
by the wide-angle lens .
– Date & Time: Set the date and time here .
– Display Flip: This function rotates the display 180° to allow the camera to be operated upside down .
– Screen Saver: Set to turn off the display automatically after a certain time .
– Auto Power Off: Sets the camera to turn off automatically after a certain time .
– Power On Auto Record: This function automatically starts recording a video directly when the camera is
turned on with the previously set settings .
– USB: Set whether the camera is recognized as a removable disk (MSDC – mass storage device class) or
webcam (PCCAM) when connected to a PC via USB .
– Language: Change the language of the camera menu here .
– Format Card: Format your memory card here, e .g . after a firmware update .
– System: Here you will find the function to reset the camera to factory settings, as well as information on the
firmware (system info) and your memory card (card info) .
ENGLISH