Waterproof Case; Battery; Charging The Battery; Changing The Battery - Rollei 9s Plus Anleitung

Waterproof Case

30
– Insert Camera into Waterproof Case
1 . Ensure the case is clean .
2 . Insert the camera and make sure the lens fits neatly in the lens cavity .
3 . Close the locking clamps .
4 . The camera can be mounted using the accessories provided .

Battery

Before using the device for the first time, you must fully charge the battery .

– Charging the Battery

1 . Connect the camera to a computer or USB power supply (DC 5V
2 . The charging status light turns on while the battery is charging .
3 . The charging status light turns off when the battery is fully charged .

– Changing the Battery

1 . Hold the camera so that you can see the camera display and slide the battery cover to the right to
open the battery compartment .
2 . Remove the battery .
3 . lnsert the new battery so the contacts line up with those of the camera .
Note: Operation is also possible while charging (e . g . via a power bank) .

Getting Started

– Turn On: Press and hold the power / WiFi button for 3 seconds . When the camera is turned on, the
Operation Indicator turns on .
– Turn Off: Press and hold the power / WiFi button for 3 seconds .
ENGLISH
2A) .