Information Related To Transport - Sharp K-71F28BM2-EU Bedienungsanleitung

INFORMATION RELATED TO
TRANSPORT
If you need any transport :
Keep the original case of product and
carry it with its original case when need
to be carried. Follow the transport
signs on case. Tape the cooker on
upper parts, hats and heads and
saucepan carriers to the cooking
panels.
Place a paper between the upper cover
and cooking panel, cover the upper co-
ver, than tape to the side surfaces
of oven.
Tape carboard or paper onto the
front cover on interior glass of oven as
it will be suitable to the trays, for the
wire grill and trays in your oven not
damage to the oven's cover during
transport. Also tape the oven's covers
to the side walls.
If does not have the original case :
Take measure for external
surfaces (glass and paintes
surfaces) of oven against possible
blows.
The EasyFix Wire Rack
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
7
6
4
3
2
1
• Insert the accessory to the correct
position inside the oven.
• Allow at least a 1 cm space between the
fan cover and accessories.
• Take care removing cookware and/or
accessories out of the oven. Hot meals
or accessories can cause burns.
• The accessories may deform with heat.
Once they have cooled down, they will
recover their original appearance and
performance.
• Trays and wire grids can be positioned
on any level from of 1 to 7.
• Telescopic rail can be positioned on
levels T1, T2.
• Level 3 is recommended for single level
cooking.
• Level T2 is recommended for single
level cooking with the telescopic rails.
• Level 2 and Level 4 are recommended
for double level cooking.
• The turnspit wire grid must be
positioned on Level 3.
• Level T2 is used for turnspit wire grid
positioning with the telescopic rails.
****Accessories may vary depending on the
model purchased.
EN - 20
5
T2
T1