Alecto WS5200 Gebrauchsanleitung Seite 79

Please check your Wi-Fi router or AP devices setting and contact the router
manufacturer if you still have problems in connecting the console to your
Wi-Fi network.
Note: If you are testing the setup with the outdoor sensor package nearby
and indoor, you may want to consider connecting to Wi-Fi, but not yet
configuring any of the weather services. The reason is that while
indoor the temperatures and humidity recorded by the outdoor sensor,
and as reported to the weather service(s) will reflect indoor
conditions, and not outdoor conditions. Therefore, they will be
incorrect. Furthermore, the rainfall bucket may be tripped during
handling, causing rain to register while it may not actually have been
raining. One way to prevent this is to follow all instructions, except to
use an incorrect password, on purpose! Then, after final outdoor
installation, come back and change the password after clearing
console history. That will start uploading to the services with a clean
slate.
7.1.1 Download mobile application
Wi-Fi configuration is done using your mobile device, either iOS or Android.
Start by downloading the WS View application from the Apple App Store or
Google Play store, as appropriate for your device.
7.1.2 Configure Wi-Fi via BLE
Press button "TEMP/+" and "LIGHT" button at the same time and hold for 2s
will activate configuration mode. The following display will be on at the Date
section on LCD：
If you own an Apple iOS device, refer to Section 7.1.2.1.
If you own a Android device, refer to Section 7.1.2.2.
7.1.2.1 Apple iOS user
Run the WS View app from your mobile device's home screen.
When prompted "Allow WS View to access your location?" choose" Allow
While Using App. " If you do not select this option, your phone will not
connect to the weather station:
Configure Device
79