Alecto WS5200 Gebrauchsanleitung Seite 68

To save and proceed to the next alarm setting, press the Mode button.
To exit the High Alarm Set Mode at any time, press the LIGHT button.
Table 9 summarizes the alarm mode sequence and commands.
Command
[MODE] + Enter High Alarm
2 seconds Set Mode, Alarm
Hour
[MODE] Alarm Minute
[MODE] Alarm High Indoor
Temperature
[MODE] Alarm High Indoor
Humidity
Mode
Press [TEMP +] or [WIND -] to adjust
alarm hour up or down.
Press [RAIN/PRE] to turn the time alarm
on or off. When the alarm is on, the alarm
time icon
Press[TEMP +] or [WIND -] to adjust
alarm minute up or down.
Press [RAIN/PRE] to turn the time alarm
on. The alarm time icon
Press [RAIN/PRE] again to turn the time
alarm off. The alarm time icon will
disappear.
Press [TEMP +] or [WIND - ]to adjust
alarm value up or down.
Press [RAIN/PRE] to turn the alarm on.
The alarm icon
Press [RAIN/PRE] to turn the alarm off.
The alarm icon will disappear.
Press [TEMP +] or [WIND -] to adjust
alarm value up or down.
Press [RAIN/PRE] to turn the alarm on.
The alarm icon
Press [RAIN/PRE] to turn the alarm off.
The alarm icon will disappear.
68
Settings
will appear.
will appear.
will appear.
will appear.