Before First Use; Electromagnetic Fields (Emf); Using The Appliance - Masterpro Bgmp-9167 Bedienungsanleitung

EN
• Do not place anything on top of the appliance.
• Do not use the appliance for any other purpose than described in this manual.
• Do not let the appliance operate unattended.
• During hot air frying, hot steam is released through the air outlet openings. Keep
your hands and face at a safe distance from the steam and form the air outlet
openings.
Also be careful of hot steam and air when you remove the basket from the appliance.
• Any accessible surfaces may become hot during use.
• Immediately unplug the appliance if you see dark smoke coming out of the appliance.
Wait for the smoke emission to stop before you remove the basket from the appliance.
CAUTION
• Ensure the appliance in placed on a horizontal, even and stable surface.
• This appliance is designed for household use only. It may not suitable to be safely-
used in environments such as staff kitchens, farms, motels, and other non-residential
environments.
• The guarantee is invalid if the appliance is used for professional or semi-professional-
Purposes, or it is not used according to instructions.
• Always unplug the appliance while not using.
• The appliance needs approximately 30 minutes to cool down for handle or cleaning-
safely.

ELECTROMAGNETIC FIELDS (EMF)

The appliance complies whit all standards regarding Electro-Magnetic fields (EMF).
Under proper handling, there is no harm for human body based on available scientific
Evidence.
11

BEFORE FIRST USE

Clean the air fryer following the instructions set in 'Care and Maintenance' section.
Note: When using the air fryer for the first time, a slight smoke or odour may be
emitted. This is normal and will soon subside. Allow for sufficient ventilation around
the air fryer during use. It's advised to run the air fryer without food for approx. 10
minutes before first use; this will prevent the initial smoke or odour from affecting the
taste of the food.
FUNCTIONS
FRENCH FRIES, RIBS, CHICKEN LEG, SHRIMP, BAKE, FISH, DEFOREST.

USING THE APPLIANCE

Using instruction for this air fryer.
STEP 1: Plug in and switch on the air fryer at the mains power supply; the air fryer will
beep and the power button will illuminate to indicate that the unit is plugged in.
STEP 2: Tap the power button to switch on the air fryer; the LED display will show "180
°C" and 15MIN", indicating that the time and temperature are ready to be
programmed.
STEP 3: Following the instructions in the section entitled'Using the Digital Control
Panel" , preheat the air fryer for approx.5 minutes. Use + or - to increase or decrease
the time or temperature if required.
STEP 4: Once preheated, remove the cooking compartment by pulling it out of the air
fryer using the handle. Place the cooking compartment onto a flat, stable, heat-resis-
tant surface. Check that the plastic button cover is over the basket release button to
avoid it from being released accidentally.
STEP 5: Place the ingredients into the non-stick coated cooking basket and then slide
the cooking compartment back into the air fryer main unit to close it.
STEP 6: Use the digital control panel to set the cooking time and temperature as
required for the ingredients. The time and temperature can also be set using the
"MODE" buttons. This will automatically cycle between time and temperature presets
for cooking various foods. These presets can then be adjusted using + or – to increase
or decrease the time or temperature as required. Then press the power button to
begin cooking.
STEP 7: Some ingredients may require shaking halfway through the cooking time.
Remove the cooking compartment by pulling the cooking basket handle out of the air
12
EN