Märklin Farm Bedienungsanleitung Seite 14

Install or change the batteries only in
pairs according to the markings!
Pay attention to the polarity!
Put the cover for the battery holder back in
3
place.
Screw the battery holder down into place.
6.3 Locomotive with Tender
Unscrew the battery holder.
1
Remove the battery holder.
2.
1.
14
1.
2
Do not lay the contacts for the battery
pack on a conductive surface and/or do
not short circuit these contacts – This may
cause a fire!
Insert four (4) type AA/LR 06 batteries as shown in
the drawing.
Install or change the four (4) batteries
only as a group! Pay attention to the
polarity!
Slide the battery holder into place
3
4.
4.
1.
5.