Possible Cause - Pool Uno Bedienungsanleitung

IMMEDIATE
MESSAGE
AUTOMATIC STOP
DISPLAYED /
FAULT Chlorine
DETECTED
dosing
Yes
Yes
No

POSSIBLE CAUSE

pH
regulation
Cumulative volume of
chlorine injected that
No
day at its maximum
value
ORP measurement out
of tolerance (exceeding
No
± 400 mV from the ORP
setpoint)
pH probe incorrectly
No
calibrated
CHECKS AND REMEDIES
Check (and adjust
necessary) the
Injection Limit » alarm
triggering setting.
Check the chlorine
container is not empty.
At the chlorine injection
circuit, check the condition
of the :
- filter with ballast.
- semi-rigid pipes.
- peristaltic pump.
- injection connector.
Manually inject chlorine.
Check that :
- the peristaltic pump is
working properly.
- chlorine is correctly
injected.
Check the settings in the «
«
menus.
Check (and adjust
necessary) the setting of the
ORP setpoint.
Calibrate the pH probe.
OPTION TO
DISABLE VIA
THE «
» MENU
if
« CL
Yes
», «
» and
»
if
Yes
Yes
18