Safety; Alarms And Alerts - Pool Uno Bedienungsanleitung

4.9. Safety

4.9.1. Alarms and alerts

DEFAULT
SAFETY
CONFIGURATION
Alarms Activated
Alert Activated
* The corresponding alarm or alert is maintained while the detected fault remains in place, and the corresponding
message reappears a few moments after dismissal.
MESSAGE
AUTOMATIC STOP
DISPLAYED /
Chlorine
FAULT DETECTED
dosing
AUTOMATIC OPERATIONS
UPON ACTIVATION
Message
displayed
IMMEDIATE
POSSIBLE CAUSE
pH
regulation
Empty chlorine
Yes No
pH corrector
No Yes
container empty
Yes Yes
Immediate stop
of chlorine dosing
and/or pH regulation
Yes
No
CHECKS AND REMEDIES
Replace the chlorine container.
container
Replace the pH corrector container.
Check that :
- the flow sensor is properly
connected to the electronics unit.
- the flow sensor is activated (see
sensor settings).
- the valves on the filtration circuit
Insufficient
are open.
water flow
- the
properly.
- the
blocked.
- there is enough water in the
pool.
DISMISSAL*
Press the OK or
(press or press and hold, depending
on whether it is an alarm or alert).
filter pump is working
filtration circuit is
button
OPTION TO
DISABLE VIA
THE «
» MENU
Yes
if the empty « CL
Container » sensor is
activated
Yes
if the empty « pH
Container » sensor is
activated
No
not
16