Intended Use; Product Description; Operating Elements And Status Indicators - SICK GLD20 Betriebsanleitung

OPERATING INSTRUCTIONS
2.3

Intended use

3

Product description

3.1

Operating elements and status indicators

en
4 Mounting
24 O P E R A T I N G I N S T R U C T I O N S | GLD20
The GLD20 is an opto-electronic photoelectric retro-reflective sensor (referred to as
"sensor" in the following) for the optical, non-contact detection of objects, animals, and
persons. A reflector is required for this product to function. If the product is used for any
other purpose or modified in any way, any warranty claim against SICK AG shall become
void.
Table 2: Operating elements and status indicators
GLD20 x-xxxxxxxA0
Front view Preset default -
no possibility of
setting
1
2
Green LED: Supply voltage active
1
Yellow LED: status of received light beam
2
Potentiometer: sensitivity adjustment
3
Switch: light (L) / dark (D)
4
Potentiometer: time delay adjustment
5
Selection of time delay function
6
Mount the sensor and the reflector using suitable mounting brackets (see the SICK
range of accessories). Align the sensor and reflector with each other.
Note the sensor's maximum permissible tightening torque:
x-xxxxxxx70 x-xxxxxxx7E
Potentiometer: Potentiometer:
sensitivity adjust‐ sensitivity adjust‐
ment ment
Switch: light (L) /
dark (D)
3 3
2
1
1
2
L
x-xxxxxxx7G
Potentiometer:
sensitivity adjust‐
ment
Switch: light (L) /
dark (D)
Potentiometer:
time delay
adjustment
Selection of time
delay function
T ms T mode
0
5
6
3 1
2
3
4
4
1
2 2
D L D
8026844/2022-06-09 | SICK
Subject to change without notice