Candy CNF 170 FW Bedienungsanleitung Seite 13

well-ventilated and has less hot air. Do not locate the refrigerator near a
heat source such as cooker, and avoid it from direct sunlight, thus
guaranteeing the refrigeration effect while saving energy consumption. Do
not locate the refrigerator in the damp place, so as to prevent the
refrigerator from rusting and leaking electricity. The result of the total
space of the room in which the refrigerator is installed being divided by the
refrigerant charge amount of the refrigerator shall not be less than 8 g/ M 3 .
Note: The amount of refrigerant charged for the refrigerator can be found
on the nameplate.
2. Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore,
at least 30mm of free space should be spared at the top side, more
than 100mm on both sides, and above 50mm at the back side of the
refrigerator. Dimensions in mm:
544
Note：Figure 1, Figure 2 only illustrate the space demand of the product.
3. Level ground
Place the refrigerator on the solid and flat ground (floor) to keep it stable, or
else, it will give rise to vibration and noise. When the refrigerator is placed on
such flooring materials as carpet, straw mat, polyvinyl chloride, the solid
backing plates should be applied underneath the refrigerator, so as to prevent
color change due to heat dissipation.
D H
641 1700
A B
890 1096
13
13
C(° ° ) E
125 50
F
100