When Led Coupling Nsk ® In Assembled - 3TECH Ti-940L Bedienungsanleitung

6.3.2 Removing the medical device
- Hold the LED coupling tightly, slide the lock ring (Fig.6-8 ).
- Pull the medical device o (Fig.6-8 ).
Fig. 6-7
NOTE
Rotate the spray ring on the LED coupling in order to regulate the fraction of water when the LED coupling W&H
mended water amount should be more than 50 ml/min.
6.4 When LED coupling BIEN AIR Unifi x
®
6.4.1 Assemble the LED coupling and attach the medical device
– Screw the LED couplings onto the turbine hose (Fig.6-9 ).
– Tighten the screw cap of the turbine hose hang-tightly (Fig.6-9 ).
30
Fig. 6-8
Roto Quick is mounted. Recom-
®
is assembled
®
– Assemble the medical device accurately on the LED coupling until the coupling audibly locks in the medical device (Fig.6-9 )
6.4.2 Removing the medical device
– Hold the LED coupling tightly, press two buttons on the side of the LED coupling (Fig.6-10 ).
– Pull the medical device o (Fig.6-10 ).
Fig. 6-9
NOTE
Rotate the spray ring on the LED coupling in order to regulate the fraction of water when the LED coupling BIEN AIR
mended water amount should be more than 50 ml/min.
6.5 When LED coupling NSK in assembled
®
6.5.1 Assembled the LED coupling and attach the medical device
– Screw the LED couplings onto the turbine hose (Fig.6-11 ).
Fig. 6-10
Unifi x is assembled. Recom-
® ®
31