3TECH Ti-940L Bedienungsanleitung Seite 15

Fig. 6-1
NOTE
Rotate the spray ring on the LED coupling in order to regulate the fraction of water when the LED coupling KaVo
mended water amount should be more than 50 ml/min.
6.2 When LED coupling SIRONA is assembled
®
6.2.1 Assemble the LED coupling and attach the medical device
– Screw the LED couplings onto the turbine hose (Fig.6-4 )
– Tighten the screw cap of the turbine hose with the wrench (delivered with the medical device) (Fig.6-4
– Assemble the medical device accurately on the LED coupling until the coupling audibly locks in the medical device (Fig.6-5 ).
6.2.2 Removing the medical device
Hold the LED coupling tightly; pull the medical device o while twisting slightly (Fig.6-6 ).
28
Fig. 6-2 Fig. 6-3
Multifl ex is assembled. Recom-
® ®
).
Fig. 6-4
NOTE
Rotate the spray ring on the LED coupling in order to regulate the fraction of water when the LED coupling SIRONA
water amount should be more than 50 ml/min.
6.3 When LED coupling W&H Roto Quick is assembled
®
6.3.1 Assemble the LED coupling and attach the medical device
- Screw the LED coupling onto the turbine hose (Fig.6-7 ).
- Tighten the screw cap of the turbine hose hang-tightly (Fig.6-7 ).
- Assemble the medical device accurately on the LED coupling while sliding the lock ring (Fig.6-7
Fig. 6-5 Fig. 6-6
is assembled. Recommended
®
).
29