HP DesignJet Z6 Pro Einführende Informationen Seite 9

Table 2 Dynamic icons
If the printer is left idle for some time, it goes into sleep mode and switches off the front-
panel display.
To change the time that elapses before sleep mode, tap , then System > Power options >
Printer sleep. You can set a time between 5 and 60 minutes; the default is 13 minutes.
This time includes 5 minutes in dim mode.
The printer can be woken from sleep mode by the Power button, by sending a print job, by
opening a cover, or by tapping the front panel.
You can use the printer's auto-off feature to turn the printer off automatically. For
example, setting it to 2 hours turns the printer off after 2 hours of inactivity. In this way,
you can save more energy.
The auto-off feature is automatically disabled when the printer is connected to the
network, to avoid inconveniencing network users. Auto-off can be re-enabled if required.
Front-panel error codes
The printer may occasionally display a system error, which consists of a numerical code of
12 digits followed by the recommended action that you should take.
In most cases you will be asked to restart the printer, because when the printer starts it
can diagnose the issue better and may be able to fix it automatically. If the problem
persists after restarting, you should contact your HP support representative and be ready
to give the numerical code from the error message.
If the error message contains some other recommended action, follow the printer's
instructions.
ENWW
Perform paper operations, such as
loading paper.
View ink levels and perform ink-supply
operations.
Perform operations to improve the print
quality.
Find information about the printer
View information about the printer's
usage of paper and ink.
Search the paper library for all available
paper presets for your printer.
View and manage the job queue.
View and configure the printer's
network settings.
View and change specific printer
settings.
Access to the user guide.
Front-panel error codes
7