Product Description And Specifications; Intended Use; Product Features - Bosch GAS 25 L SFC Professional Originalbetriebsanleitung

Do not clean the vacuum cleaner by spraying a jet of
u
water directly at it. Water entering the top of the va-
cuum cleaner will increase the risk of electric shock.
Connect the dust extractor to a properly earthed
u
power supply system. The plug socket and extension
cable must have a fully functioning protective conductor.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Symbols
The following symbols may provide you with important in-
formation pertaining to the use of your dust extractor. Please
take note of these symbols and their meaning. Knowing what
these symbols mean will help you to use your extractor more
effectively and more safely.
Symbols and their meaning
WARNING! Read all the safety and gen-
eral instructions. Failure to observe the
safety and general instructions may res-
ult in electric shock, fire and/or serious
injury.
Dust extractor from dust class L in ac-
cordance with IEC/EN 60335-2-69 for
the dry extraction of harmful dusts with
an exposure limit of > 1 mg/m³
WARNING! The dust extractor contains
dust particles that pose a risk to
health. Emptying and maintenance
procedures, including the disposal of
dust containers, should only be carried
out by professionals. Suitable protect-
ive equipment is required. Do not oper-
ate the dust extractor unless the com-
plete filter system is correctly inser-
ted. Otherwise, you are putting your
health at risk.
Open the top part of the dust
extractor (3) and hold it firmly. Hold the
pleated filter (12) by the supports and
take it out from above.
Symbols on the mode selector switch
Switching On
Switching Off
Electromagnetic filter cleaning (SFC)
Bosch Power Tools
Symbols and their meaning
Operation with remote automatic switch-
ing
Product Description and
Specifications
fire and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The dust extractor is intended for collecting, vacuuming,
conveying and separating non-flammable dry dusts, non-
flammable liquids and a water-air mixture. The dust extrac-
tion capability of the dust extractor has been tested and cor-
responds to dust class L. It is suitable for the increased de-
mands in professional use, e.g. in trade, industry and work-
shops.
Dust extractors from dust class L in accordance with IEC/
EN 60335‑2‑69 may only be used to vacuum and extract
harmful dust with an exposure limit of > 1 mg/m³.
Only use the dust extractor if you can fully evaluate all func-
tions and carry them out without restrictions, or if you have
received corresponding instructions.
The plug socket must only be used in dry conditions during
operation.

Product features

The numbering of the product features refers to the repres-
entation of the vacuum cleaner on the graphic pages.
(1) Cable holder
(2) Carrying handle
(3) Top part of dust extractor
(4) Mode selector switch
(5) Plug socket for power tool
(6) Lock
(7) Hose adapter
(8) Vacuum hose
(9) Container
(10) Catch for top part of dust extractor
(11) Dust bag
(12) Pleated filter
(13) Motor protection filter
(14) Fill level sensors
English | 13
Read all the safety and
general instructions. Fail-
ure to observe the safety
and general instructions
may result in electric shock,
1 609 92A 6U5 | (04.07.2022)