Product Description And Specifications; Intended Use; Product Features - Bosch GAS 35 L AFC Professional Originalbetriebsanleitung

18 | English
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The tool is intended for collecting, vacuuming, conveying
and separating non-flammable dry dust types, non-flam-
mable liquids and a mixture of water and air. The dust extrac-
tion capability of the dust extractor has been tested and cor-
responds to dust class L. It is suitable for the increased de-
mands in professional use, e.g. in trade, industry and work-
shops.
1 609 92A 4M0 | (16.11.2018)
Downloaded from www.Manualslib.com
Min./max.
AFC
Permitted connected load of the connected power tool (country-specific)
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
manuals search engine
Do not sit or stand on the dust extractor. The dust ex-
tractor may tip over and become damaged if you do this.
This poses a risk of injury.
Automatic start/stop
Extracting dust that accumulates from working power
tools
The dust extractor switches on automatically and off again
with a time delay
Switching off
Vacuuming
Vacuuming up dust deposits
Continuous regulation of suction power:
– Maximum suction power for applications with a high
level of dust generation
– Reduced suction power for applications with a low
level of dust generation, and also to regulate the suc-
tion between the connected power tool and the surface
of the workpiece, for example (e.g. when sanding)
Automatic filter cleaning (AFC)
Dust extractors from dust class L in accordance with IEC/EN
60335-2-69 may only be used to vacuum and extract harm-
ful dust with an exposure limit of > 1 mg/m
Only use the dust extractor if you can fully evaluate all func-
tions and carry them out without restrictions, or if you have
received corresponding instructions.

Product features

The numbering of the product features refers to the repres-
entation of the vacuum cleaner on the graphic pages.
(1) Container
(2) Hose adapter
(3) AFC button
(4) Socket for power tool
(5) Holder for vacuum hose
(6) Mode selector switch
(7) Suction power regulator
(not applicable for article number 3 601 JC3 270)
3
.
Bosch Power Tools