Possible Cause - COMAC CA OIL 40 XL Benutzungs- Und Wartungsanleitung

This chapter lists the most common problems linked with the use of the appliance. If you are unable
to resolve the problems with the information given here, please contact your nearest assistance
centre.
PROBLEM

POSSIBLE CAUSE

The main switch is not activated.
The plug on the appliance's power
cable
inserted into the mains socket.
The
the appliance do not match the
electrical specifications of the power
supply network.
The power cable is damaged.
The vacuum hose is not connected
correctly to the nozzle on the
collection tank.
The vacuum hose is not connected
correctly to the extension hose.
The extension hose is not connected
correctly to the vacuum accessory
being used.
The vacuum circuit is blocked
(vacuum hose; extension hose;
vacuum accessory).
There is a blockage in the vacuum
filters.
TROUBLESHOOTING
has not been correctly
electrical specifications of
SOLUTION
Press the main switch.
Connect the plug on the appliance's
power cable to the mains socket.
Check that the technical data on
the appliance's serial number plate
match the data of the mains supply.
Contact a specialised technician
immediately.
Connect the vacuum hose correctly
to the nozzle on the collection tank.
Connect the vacuum hose correctly
to the extension hose.
Connect the extension
correctly to the vacuum accessory
being used.
Remove the obstruction in the
vacuum circuit.
Clear the obstruction in the vacuum
filters.
15
tube