Troubleshooting; Service Data; Energy Efficiency - Electrolux KODEH60X Benutzerinformation

Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
13.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not heat
up.
The door gasket is dam‐
aged.

13.2 Service data

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the oven cavity. Do not remove the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. ENERGY EFFICIENCY

14.1 Product Information and Product Information Sheet*
Supplier's name
Model identification
Check if...
The fuse is blown.
Do not use the oven.
Contact an Authorised
Service Centre.
Problem
The display shows
"12.00".
The water leaks out of
the cavity embossment.
Unsatisfying cooking per‐
formance of the function:
True Fan Cooking
PLUS .
The lamp does not work.
.........................................
.........................................
.........................................
Electrolux
KODEH60X 949499353
Check if...
There was a power cut.
Set the time of day.
There is too much water
in the cavity emboss‐
ment.
You filled the cavity em‐
bossment with water.
The lamp is burnt out.
ENGLISH 43