Operation - auna Areal Bar 950 Bedienungsanleitung

OPERATION

1. Connect the mains unit to the sound bar and the subwoofer.
2. Press the On/Standby button on the unit or on the remote control to
switch on the tower.
3. Press and hold the remote device control button for 15 seconds. The
red LED flashes quickly. When the lamp has stopped flashing and is lit,
the sound bar and the subwoofer are connected. The next time the unit
is switched on, it will connect automatically.
4. Connect external audio sources to the sound bar with an audio cable.
The LED changes from red to violet.
5. Use the source selection button (3) to select USB mode or optical
mode. The LED lamp flashes slowly in red. In optical mode, the LED
flashes violet at a high frequency.
6. Go to BT mode with the source selection button (3). The LED turns
blue and flashes slowly. On your mobile device, select the BT device
named Areal Bar 950. When the units are connected, the LED lights up
constantly.
EN
19