Getting Started; Bluetooth Operation - auna Intelligence 10032085 Bedienungsanleitung

GETTING STARTED

Power Source
There is a built in Li-ion rechargeable battery, recharge it if the battery is
low.
1. Connect the Micro USB Plug from the supplied USB Connection Cable
to the Micro USB Port on the rear of unit.
2. Connect the full sized USB Plug from the supplied USB Connection
Cable to the USB Port on the USB Charger (During charging, the charge
indicator on the top ounit will turn RED,When finished, it will turn off).
NOTES:
Your battery will last longer if you're following these simple guidelines for
charging and storing:
1. A. Before first time use, charge it approximately hours until the unit is
fully charged.
2. B. Recharge and store the unit within the temperature range of
5°C~35 °C (40°F~95 °F).
3. Do not charge longer than 24 hours. Excessive charging or running the
unit until battery fully drains will damage battery. Battery life will be
extended if you keep the battery fully charged.
4. Battery life naturally shortens slowly over time.
5. The rechargeable battery incorporated in this product is not user
replaceable.
AUX IN
To listen from an external Audio Player such as a MP3 Player, Discman ...etc.
1. Connect one end of the Audio Connection Cable to the AUX Out/Line
Out/Phone Jack on the external Audio Player.
2. Connect the other end of the cable to the AUX IN Jack on the rear of the
unit. Press and hold the
mode indicator blinks green only, press the
until the Mode Indicator will turn blue.

Bluetooth Operation

1. Press and hold the MODE button to power on the unit, wait the mode
indicator blinks green only, press the
the Mode Indicator will turn blue and blinks.
2. Activate the Bluetooth menu on the device you wish to connect to the
speaker, try to search the speaker, the pairing name " Intelligence
Tube" will appear on the Bluetooth device list, select it and make
connection.
3. After successful connection, the unit will send a tone and the indicator
MODE button to power on the unit, wait the
MODE button repeatedly
MODE button repeatedly until
EN
31