Operation; Cleaning And Care - auna Clubmaster DJ 10035261 Bedienungsanleitung

EN
28

OPERATION

BT connection
1. Turn on the speakers and select BT mode by pressing the SOURCE
button.
2. Turn on the BT function of your mobile phone to search for BT devices.
Select [Clubmaster Go] from the hit list. Select [OK] or [YES] to pair this
device with your mobile phone. When [BT] is shown continuously in the
display, the two devices are successfully paired. Once the connection is
established, you can play music from your mobile phone.
TWS Connection (optional)
3. Switch on a second Clubmaster Go speaker (if available) and select the
BT mode. Press and hold the PLAY/PAUSE key on the second speaker
for 2 seconds until [toN] is displayed. When the [bl] indicator light
is lit or a sound is heard from another device, the TWS connection is
established. The left channel is then speaker 1 and the right channel is
speaker 2.
4. Press and hold the PLAY/PAUSE button on the second speaker for
2 seconds to disconnect the TWS connection. The display shows [toF].

CLEANING AND CARE

• Use a soft cloth or cotton dipped in a neutral solution for cleaning the
surface of the speaker. Do not use the type of cloth that you use for
washing dishes or aggressive chemical agents.
• If the speaker is not working properly during a storm, please disconnect
the plug from the power socket and reinsert it after a minute.
• Do not drop small items or a liquid into the speaker.
• In the event that you find small items or a liquid inside the speaker ,you
see smoke or smell an odour,immediately disconnect the speaker from
the power grid .send the speaker to an authorised service centre.