Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
20
OPERATION
Press the power button
power button again to switch off the speaker to standby mode.
•
Activate BT on your mobile device. Search for BT devices in your area
and pair with Light-Up. If you're prompted to enter a password, please
type in "0000".
•
The Light Up will make a beep sound upon successful connection.
•
The Light Up will auto reconnect the previous paired device when it en-
ters into BT mode. If the unit doesn't auto connect with the previous
paired device, please restart the BT in the smartphone/tablet and then
follow the above steps to finish the connection.
•
You can manually turn of BT for your smartphone/tablet; BT connection
will also be cancelled in case the smartphone/tablet is too far away
from the Light Up (over 10m). in this latter case, the unit will go back to
BT standby mode.
•
To reconnect, please ensure that BT on your smartphone is set at the
'searching device' mode. Keep pressing 'pairing' until you find the Light
Up again, and follow the above steps.
Use the supplied 3.5mm audio cable to connect external audio players with
the Light Up. Press MODE repeatedly to change to AUX mode. Use the exter-
nal player to playback audio.
•
USB port for charging
•
USB power output DC 5V~0.5A. It supports charging all devices in
the power range.
•
When charging a device, ensure that the power supply is the right
one for your device.
•
Charging function is ok under OFF/ BT/ Aux in mode
•
USB/SD for MP3 playback
•
Power on the unit and insert a USB Flash Drive (not supplied) into
the USB Port, ensuring the plug is fully inserted in the correct way.
The tower will play music from the USB automatically. The maxi-
once to switch on the tower speaker. Press the
BT: Pairing
AUX
USB/SD
Werbung
Kapitel
Inhaltsverzeichnis
