Specification; Assembly - Axminster AW355WL Originalanleitung

Code
Model
Rating
Power
Speed
Spindle Thread
Taper Tailstock
Distance Between Centres
Max Diameter over Bed
Tool Rest Stem Diameter
Overall L x W x H
Weight
The machine and its accessories will arrive coated with
corrosion preventative grease. This will need to be cleaned
from the machine, its components and accessories prior to it
being set up. Use proprietary de greaser. Wear overalls, coverall
and eye protection before cleaning.
95% of the machine comes fully assembled, all that remains is
to fit the four prong drive centre (F) and the 60˚ live centre (G)
and tool rest (B).
1. Locate the four prong drive centre (F) and live centre (G).
Remove the faceplate (C) by loosening the two grub screws
and using the spanner (D), unscrew the faceplate from the
spindle left handed thread and place aside, see fig 01-02-03.
Fig 01-02-03
2. Insert the drive centre (F) into the spindle and repeat for
Grub screws
Hex key
5
D
the live centre (G) into the tailstock barrel, see fig 04-05.
G

SPECIFICATION

107701
AW355WL
Workshop
750W 230V 50Hz 1ph
250-3,550rpm
T38 M33 x 3.5 mm
510 mm
355 mm
25.4 mm
1,040 mm x 370 mm x 480 mm
57 kgs

ASSEMBLY

C
Fig 04-05
F
Continues over...
2MT