Bushnell VAULT Bedienungsanleitung Seite 4

USING THE HARNESS WITHOUT THE BINO PACK:
The Vault harness can be worn without using the bino pack. Simply unbuckle the
harness buckles from the bino pack and click each side together, as shown here.
Adjust the length of the straps to your preference. Tug on the Binocular Attachment
Straps to make sure the binocular is secure.
THE VAULT™ LRF POUCH
Attaching and using the Vault LRF Pouch:
The Vault Modular Optics Protection System has many options to
accommodate any outdoor enthusiast. Using the Vault LRF (Laser
Rangefinder) Pouch with your Vault Bino Pack adds more versatility
to your adventure. The Vault LRF pouch has the same fabric and quiet
magnetic closure as the bino pack. It attaches to the bino pack using three
simple, secure Locking U-Clips. The pouch can be mounted on either side
of the pack in two positions. An included coiled tether prevents drops.
1. Attach your Laser Rangefinder to the Vault LRF Pouch using the provided coiled
tether. Thread the loop through the lanyard hole on your LRF.
2. Clip the end of the cord to either of the two black rubber tabs with holes on the
back of the pouch.
3. To attach the Vault LRF Pouch to the bino pack in any of the four possible positions,
use the three Locking U-Clips to connect the rubber loops or straps of the Bino Pack
and the LRF Pouch. Ensure the metal tab is closed on the Locking U-Clip by securing it
over the hook.
Side Open Position
U-Clip Placement for Side Open Position
4
Front Open Position
U-Clip Placement for Front Open Position
Three Locking U-Clips
are provided with the
Vault LRF Pouch.