Beurer BR 90 Gebrauchsanweisung Seite 35

- For a 3-second application, press the activation button
Half of the illuminated ring
application is starting. This short application time is recommended
for first use or use on sensitive skin.
- For a 6-second application, press the activation button
quick succession. The blue illuminated ring
here and indicates that the treatment is starting. This application
time is recommended for regular use on normal skin.
3. After the end of the application, an acoustic signal sounds, heating of the
heating plate
goes out. Remove the heating plate
4
the signal sounds.
4. If you want to switch on the light, slide the ON/OFF switch
towards the heating plate
The light is automatically switched off together with the device 2 min-
utes after use.
IMPORTANT
Depending on the sensitivity of the person using the device and of the area
of skin, the treatment temperature may feel unpleasant and cause slight
skin redness and, in rare cases, irritated skin. If the heat function feels too
hot, stop treatment immediately.
is automatically stopped and the blue illuminated ring
3
3
lighting up blue indicates that the
4
from the area of skin once
3
with the symbol; the light turns on.
35
once.
5
twice in
5
is completely lit up
4
2
further