resist kickback forces. The operator can control torque reactions or kickback forces, if
proper precautions are taken
•
Never place your hand near the rotating/moving accessory. Accessory may kickback
over your hand.
•
Switch off the unit immediately in case of blocking or twist. Disconnect the air supply and
do not switch on again until the problem is solved. Understand the reason why the tool
has been blocked and make sure that this situation will not occur once more by
counteract.
•
In case the air tool gives a strong vibration, replace the accessory, probably it's
damaged or worn out..
Explanation of the pictograms:
Always use hearing protection, face and eye-protection, dusk-mask, if necessary a hair-net,
protective gloves and read / understand the instruction manual.
16