Removing The Unit - Kenwood KMM-BT358 Bedienungsanleitung

Installation/Connection

Removing the unit

1 Detach the faceplate.
2 Remove the trim plate.
3 Insert the extraction keys deeply into the slots on each side, then
follow the arrows as shown on the illustration.
Connect external components
No Part
1
Microphone input jack (Page 13)
2
Output terminals (See the following "Connect external amplifiers via output terminals".)
Connect external amplifiers via output terminals
When connecting an external amplifier to the output terminals of this unit,
securely connect the amplifier ground wire to the car chassis to prevent
damage to the unit.
Model Output terminals
REAR:
/
FRONT:
SW:
REAR/SW: Rear/subwoofer output
2-way crossover 3-way crossover
Rear output Tweeter output
Front output Mid Range output
Subwoofer output Woofer output
Woofer output
ENGLISH
27