Daily Use - Electrolux EB6L50XDSP Benutzerinformation

1. , - press to set the time.
After approximately 5 sec., the
flashing stops and the display
shows the time.
Turn off the oven and wait until it is cold. Place the accessories and the removable shelf supports in the oven.

6. DAILY USE

WARNING!
Refer to Safety chapters.
6.1 How to set: Heating function
Step 1 Turn the knob for the heating functions
to select a heating function.
6.2 Setting the function: BakingPlus
WARNING!
Risk of burns and damage to the appliance.
Step 1 Make sure that the oven is cold.
Step 2 Fill the cavity embossment with tap wa‐
ter.
The maximum capacity of the cavity
embossment is 250 ml. Do not refill the
cavity embossment during cooking or
when the oven is hot.
Step 3 Put food in the oven.
Refer to "Hints and tips" chapter. Do not open the oven door during cooking.
Step 4
Set the function:
Step 5 Turn the control knob for the temperature to set temperature.
Step 6 Turn the knob for the heating functions to the off position to turn off the oven.
Step 7 After the function ends, carefully open the door. Released humidity can cause burns.
Step 8 Make sure that the oven is cold. Remove the remaining water from the cavity embossment.
42 ENGLISH
1. Remove all accessories and re‐
movable shelf supports from
the oven.
2. Clean the oven and the acces‐
sories with a microfibre cloth,
warm water and a mild deter‐
gent.
.
1. Set the maximum temperature
for the function:
Time: 1 h.
2. Set the maximum temperature
for the function:
Time: 15 min.
Step 2 Turn the control knob to select the tem‐
perature.
Step 3 When the cooking ends, turn the knobs
to the off position to turn off the oven.
.
.