Labelmate S-100 Bedienungsanleitung Seite 3

About your Slitter
Your Labelmate Slitter is a quick and easy way to produce much faster high quantities of smaller
labels as you can print multiple-across label rolls and then slit them into separate, individual label
rolls. S-100 and S-200 are "in-line" solutions that can be placed at the output of any label printer.
P/N MODEL
Heavy-Duty Label Slitter. Requires a CAT-3-CHUCK.
LMS001 S-100
Size: W x D x H: 355 x 280 x 250 mm.
Heavy-Duty Label Slitter. Requires a CAT-3-CHUCK(270)
LMS002 S-200
Size: W x D x H: 355 x 280 x 250 mm.
GENERAL CONTENT OF THE PACKAGING
Remove all parts from the shipping container and verify contents.
• User Manual (this document)
• Slitter Unit
• If ordered, Optional Counter with power supply module (Factory Installed)
Retain the shipping container and packaging for storage and transport.
GENERAL
• Power Supply Counter: Input 100-240 VAC - 50-60 Hz Output: 1.5V - 12V DC 300mA
• Weight: 7.1 KG to 8.5 KG depending configuration
• Limited Warranty of 5 Years, 1 Year on the Power Supply
IMPORTANT INFORMATION
• This product is a label slitter. It is only to slit rolls of labels in an indoor, dry environment.
• Use extreme caution when manipulating the blades.
• Do not adjust the blades while slitting.
• The machine is to be used on a flat surface, if the surface is not flat, it is to be fixed using the holes in the base plate
• Do not leave the power cable of the counter in a passageway.
• The ambient light of the working area needs to be sufficient to avoid any risk.
• Connection of the machine to the power source must respect local and European legislations.
USE CAUTION AND COMMON SENSE TO AVOID PERSONAL INJURY OR DAMAGE TO CLOTHING WHEN WORKING
WITH CUTTING BLADES OR AROUND EXPOSED BLADE SURFACES
LABEL SLITTERS
DESCRIPTION
LABEL
WIDTH (mm)
170
255
Labelmate.com