Life & Mobility PRESTO Gebrauchsanleitung Seite 30

Inspired by life
Setting the time, date, temperature and distance
value
1. Turn on the scooter
2. Press "menu" button for 3 seconds
3. Press "+" to switch between Am and PM
4. Press "menu" to set hour with "+" or "-" button
5. Press "menu" to set minutes with "+" or "-"
button
6. Press "menu" to set temperature setting
7. Press "+" or "-" to switch between ˚C and F
8. Press "menu" to set driven distance value
9. Press "+" or "-" to switch between km and miles
10. Press "menu" to return to main screen
Parking
When parking your scooter, place a chain lock through
one of the wheels for added security.
EN24
P P M M P P M M P P M M
Setting the time
Maintenance
Cleaning
Be careful:
Do not use bleach or solvents.
ƒ
ƒ Do not use a high-pressure cleaner to clean the
mobility scooter.
Attention:
ƒ Regularly clean the upholstery and the frame.
Upholstery
1. Remove any light dirt with a solution of a mild
cleaning agent and warm water.
2. Carefully scrub the upholstery with a soft brush if
the dirt has been absorbed into the upholstery.
Frame and covers
1. Clean the housing with a non-abrasive cleaning
product.
2. Apply non-abrasive car wax to the entire frame
and only to the painted covers.
Batteries (see also the chapter 'Use')
Be careful:
ƒ Batteries can be dangerous. Only allow your
batteries to be installed and maintained by
a qualified scooter mechanic. They have the
required qualifications and tools to perform the
installation and maintenance safely and correctly.
The scooter uses two batteries with a 24-volt
ƒ
series connection. Never use both batteries at the
same time:
- Batteries from different manufacturers
- Batteries with different technologies
- Batteries with different date codes
EN25