Specific Information; Direct Connection; Checking And Maintenance - CAMP ENIGMA Bedienungsanleitung

INSTRUCTIONS FOR USE
Summary
C.A.M.P. Enigma is a device designed to connect two elements between each other, which need freedom of
By way of non-exhaustive example, some applications are: creation of anchorages with self-orientable points,
insertion in work-at-height and rescue systems for increased freedom of movements and preventing of twisting
ropes and lanyards. This product is intended for use to protect and prevent against the risk of falling from a height
in rescue operations, in work at a height, in the practice of mountaineering, rock-climbing and other vertical sports
that use similar techniques.
Use
Connect Enigma to the other components of the system through one of the following three methods.
USE WITH CONNECTORS (
select by preference quick links (Class Q). Avoid transverse stresses on the connectors (

DIRECT CONNECTION (

using connectors. Examples of connectable equipment are: descenders, ascenders, pulleys, metal rings, webbing
burrs and/or sharp edges. Check that the connected equipment can rotate freely into the attachment ring [1]. For
installation, follow the instructions reported in
opened and closed by means of either the key [5] or any compatible tool (screwdriver, coin). Always check the nut
[5]
CONNECTION THROUGH KNOTS (
Check that is allowed to make knots on the connected equipment.
Before loading the system, always check that all components are correctly assembled and positioned in the right
hitting uneven surfaces or sharp edges that could compromise its strength. (
in terms of minimum strength (12 kN (metal anchors) or 18 kN (fabric anchors)) and of force direction. Do not stay
above the anchor point: risk of failure/injuries in case of fall. Take measures to avoid pendulum. Enigma should not
system must never exceed 2 m and must be connected to the attachment element (A) of a EN 361 full body harness.
length of a fall. Use adequate rescue equipment and provide adequate training for the work crew so that they can

CHECKING AND MAINTENANCE

Check the correct rotation of the swivel balls [2] at each use in case of dirt, clean with a blast of compressed air and/
or immerse in fresh water and subsequently dry in a ventilated environment. After cleaning, the mechanism can be
lubricated. Cleaning and lubrication are recommended after each use in a marine environment.

SPECIFIC INFORMATION

): insert the connector into the attachment ring [1]. Use EN 362 class B or ANSI
): compatible equipment can be connected directly to the attachment rings [1] without
): rope, webbing, loops can be knotted directly into the attachment rings [1].
. The connected equipment must be free of
(scan the QR code for video instructions). The nut [4] can be
13
).
). Breaking load when
). Prevent Enigma from
). If used in a fall arrest system,