If You Have An Android Smartphone With Google Assistant; D - Using The Product; If You Have An Android Smartphone Without Google Assistant Or An Iphone; Pairing Of An At Home Connected Device And Google Home - THOMSON GUARDIAN 520015 Bedienungsanleitung

1 - USING THE PRODUCT WITH GOOGLE
HOME
Google Assistant can help you control your
connected devices.
For example, you can use the following commands:
- "OK Google" Activate the gate
- "OK Google" Activate the garage door
For more information on device names or creating/
linking a room, please consult Google support.
One tip however: if you connect multiple modules
within the same zone, and to prevent unwanted
commands, we recommend you do not use
the group name suggested by Google Home
(bedroom, office, living room, etc.) when naming
your control module.
In the event of problems with the Google Home
application or configuration of the device in Google
Home, contact Google support.
The setting up procedure depends on your
smartphone and requires an Internet connection:
1.1. If you have an Android smartphone with
Google Assistant.
Your devices need to be paired in the Thomson At
Home app to be controlled with Google Assistant.
They must be connected on the same WiFi network.
• Connect the devices to Google Assistant:
- On your Android tablet or phone, long press
the home button or say "OK Google".
- In the lower right-hand corner, press
- Press the logo at the top right, then Settings
> Assistant > Home control.
- In the "Devices" tab, press Add devices .
- Select the Thomson At Home app then follow
the instructions.
- Once successfully linked, press OK.
Your product is now connected in Google Assistant
and you can use voice control with it.

D - USING THE PRODUCT

1.2. If you have an Android smartphone without
Google Assistant or n iPhone
Your devices must be paired on the Thomson At
Home app in order to be controlled with Google
Assistant. They must be connected on the same WiFi
network.
• Connect the devices to Google Assistant
• On your tablet or phone, install and start the
Google Home app and log in to the relevant
account for your Google Home speaker.
• In the
Account
• Next, press Set up or Add > Set up device.
• Press Have something already set up?
• In the list that appears, press At Home
• Enter the login and password for the At Home
account for the app by the same name to
authorise Google Assistant to add and interact
with your At Home accessories.
2 - PAIRING OF AN AT HOME CONNECTED
DEVICE AND GOOGLE HOME
This part explains in detail how to pair an At Home
connected device with your Google Assistant. A
smart plug will be used in this example.
Important: your telephone must be connected to the
same 2.4GHz WiFi network as Google Home and the
At Home accessories

2.1. At Home

.
Check that an At Home account has been created
beforehand. If you don't have one, please create
one, referring to the section on page 8 and ensure
that your accessories work through the At Home
app.
WI-FI RECEIVER MODULE
bottom right corner, press
EN
11