Remote Control With The „ Undok ™" App - Block AURORA Bedienungsanleitung

Remote control of the device with the app „UNDOK ™"
If you own an iPhone®, iPod® or iPad®, please go to the Apple App Store® and search for the word „undok".
Important: select „iPhone apps" before!
If you have an android device (tablet or smartphone), visit Google Play Store® and look for the term „undok".
Then install the found free app on your mobile device.
Very important: to operate your Aurora, the smartphone / tablet and the Aurora must be registered in the
same wireless network and the Aurora must be turned on!
1. Start the app „UNDOK ™" now. The app is now looking for all DLNA-enabled devices in the WLAN.
2. Please select your Aurora from the found devices.
3. Your Aurora is now connected to the „UNDOK ™" app and you can control the device at distance:
- „Source" function: select the desired one from the available signal sources.
- „Browse" function: depending on the selected signal source, the various options of the signal source can be
selected here. For an overview of the functions, please refer to the respective chapters on the signal sources in
this operating manual.
- „ Playing now" function: provides information and covers (if there is any available) to the currently playing
song or radio station.
- Additional „Settings" functions: this menu allows you to switch the device off and on, change the sound
settings, quit the app and make further settings.
For further functions of the app, for example, configuration of multi-room systems, please read the enclosed
„UNDOK ™" manual.
Older versions of the app (DOK or BLOCK App) may ask for a PIN code for the connection. This is set from the
factory „1234".
If you want to change it, press the Menu button on the remote control and select System settings / Internet
settings / PIN for apps and OK here another PIN.
50