Program Mode - Hyundai Wsp 3080 R Wind Bedienungsanleitung

PROGRAM MODE

The base station has six keys for easy operation: MENU key, UP/+ key, DOWN/- key, ENTER
key, HISTORY key, ON/OFF key.
Note: Because of the default settings already determined by the manufacturer it may not be
necessary for the majority of user to perform-except the relative pressure (see further down) – any
further basic settings and changes, however, can be easily made.
Note: Keeping the UP/+ or DOWN/- key depressed when setting certain units in the manual
setting mode will increase/decrease digits in greater steps.
The setting procedure can be exited at any time by either pressing the HISTORY key or waiting
for the 30-second time-out to take effect.
The basic settings can now be performed in the following order:
Time
- Press the MENU key to select the TIME section, TIME section digits will start flashing. Enter
LCD contrast setting mode (level 1-8, default level 5), press the UP/+ or DOWN/- key to set
the value.
- Press the ENTER key to select the following modes:
• Time zone
Note: At Europe, 0 for GMT+1 time zone, 1 for GMT+2 time zone, -1 for GMT time zone.
At America, -4 for Atlantic time zone, -5 for Eastern Time zone, -6 for Central Time Zone, -7 for
Mountain Time zone, -8 for Pacific time zone, -9 for Alaska time zone, -10 for Hawaii time zone.
• V12/24h time display select (default 12 hours)
• ZDST ON/OFF (this function is only available for WWVB version, while for DCF version this
feature is not activated)
• Manual time setting (hours/minutes)
Press the UP/+ or DOWN/- key to set the value.
Note: Press ON/OFF key to set the DST ON/OFF. "DST OFF" indicates that the feature is off
and the internal real time clock will not change times automatically. "DST ON" indicates that the
feature is on and the internal real time clock will change times according to the DST time sched-
ule automatically. Some locations (Arizona and parts of Indiana) do not follow Daylight Saving
Time, and should select "DST OFF".
EN - 76