Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONNECTION
Main unit
1.
Insert the power plug (30) into the unit and the power supply unit (29)
into a suitable socket.
2. When the unit is switched on for the first time, it switches to standby
mode and the LED indicator lights up.
3. Connect the speakers to the side of the unit.
4. Switch the device on. The display backlight should now be on and the
unit is ready for operation.
Remote control
The battery compartment is located on the back of the remote control.
1.
Remove the battery compartment cap by pressing on
the tab.
2. Insert two AAA batteries into the battery compartment
as shown in the diagram.
3. Replace the battery compartment flap until you hear it
click into place.
Precautions when handling batteries
•
Changing batteries must not be left to children
•
Do not mix old batteries with new ones
•
Do not use a mixture of alkaline, carbon-zinc batteries and/or
rechargeable batteries (NI-CA)
•
Do not short-circuit the contact plates or springs in the battery
compartment
•
Only charge rechargeable batteries!
•
Dead batteries must be replaced and disposed of correctly
EN
27
Werbung
Inhaltsverzeichnis
