Bt Function; Aux-In Connection; Line Output - auna Weimar Bedienungsanleitung

BT FUNCTION

1. Select "BT" using the function selection key (5).
2. The BT indicator LED flashes to indicate that the unit is now searching
for a BT connection or is not currently connected.
3. Activate the BT function in your BT device (for example, in your
smartphone, laptop) and select "Goldsound" from the list of available
BT devices.
4. If the connection is successful, the BT indicator LED stops flashing and
is now lit continuously.
5. Now play music from your BT device! Have fun!
6. To use another BT device as a signal source, first disconnect the existing
connection: Exit the BT mode using the function selection button (5).
Repeat steps 3-5 to use another device for BT music playback.

AUX-IN CONNECTION

To use the AUX-IN connection, connect your playback device to the system
using a suitable cable. Use the 3.5 mm AUX-IN socket for this purpose.
Note: Set the volume of the external device to a level suitable for
listening.

LINE OUTPUT

You can connect this unit to your HiFi system using the line output (26) and
an appropriate cable.
EN
33