KLS Martin marVac smart Vac Gebrauchsanweisung Seite 49

marVac® / maXium® smart Vac iDetect external line current detector
Instructions for Use
Call up the setup menu (see section 5.1, "Setup menu," page 42) and select the 3rd
menu item to set up the switch-on delay time:
Initial state
Setup menu for line current detector
Submenu for activation/deactivation of the line
current detection function (here: line current
detection function activated)
The switch-on delay time of the current detector is prolonged or shortened by using the Up/Down button.
Revision 04
Button Objective
2x
Press the Delay
suction button 2x in Setup menu for line current detector
succession
Submenu for configuration of the switch-on delay in
seconds. The displayed numerical value can be
changed by the Up/Down buttons within the
permissible limits (here: switch-on delay of 10 s)
setup
49