Pentax IPFC-Serie Betriebsanleitung Seite 23

Parameter
Min alarm value
XXX.X [bar]
Ext.set enabling
ON/OFF
Set value
XXX.X [bar]
Compensation
XXX.X [bar]
Set value 2
XXX.X [bar]
Compensation 2
XXX.X [bar]
Set value update
XX [s]
Default Description
Minimum value allowed in the system. If
the readen value goes lower than this
value, an alarm occurs and the pump is
0
stopped. Pump is automatically restarted
if the readen value goes higher than the
minimum value for a period of at least 5
seconds.
Enabling of set value changing by analog
OFF
input AN3.
3
Set value to be kept constant.
Value compensation at the maximum
0
frequency for each pump. Acting on the
green button you can reverse the sign.
3
Set value to be kept constant.
Value compensation at the maximum
0
frequency for each pump. Acting on the
green button you can reverse the sign.
5 Time to update set value for
compensation.
    
 




 
23