Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INTENDED USE
This product is only designed for use in a vehicle with 12 volt on-board voltage and negative ground and func-
tions as an amplifier for audio signals. Any other use may lead to damage to the product or in the vicinity of
the product.
MECHANICAL INSTALLATION
• Avoid any damages on the components of the vehicle like air bags, cables, board computer, seat belts, gas
tank or the like.
• Ensure that the chosen location provides a sufficient air circulation for the amplifier. Do not mount the device
into small sealed spaces without air circulation or near by heat dispersing parts or electrical parts of the
vehicle.
• All cables must be as short as possible to avoid losses and interferences.
• Use self-tapping screws (not included in delivery) to install the amplifier in the vehicle.
Fastening
CAUTION
Before you start with the installation, disconnect necessarily the GROUND connection wire from
the vehicle / additional battery to avoid any risk of electric shocks and short circuits.
ENGLISH
17
Werbung
Inhaltsverzeichnis
