ESX Vision VX 8000 PRO Benutzerhandbuch Seite 22

TROUBLE SHOOTING
CAUTION
All instructions in this trouble shooting refer to the entire sound system and its individual compo-
nents. The features of your device may not match the functions described in the notes. Then skip
this point and move on to the next one.
NO FUNCTION / THE POWER LED IS NOT ILLUMINATED
First check the fuse of the routed power cable on the additional battery
The fuse is defective
Replace the defective fuse with an equivalent one, never with a higher value.
• The fuse fails again.
In this case there appears to be a short circuit between the fuse and the amplifier. To do this, check
the + 12V power cable along its entire length from the battery to the amplifier for damage and whether
there is a short circuit to ground, e.g. a contact with the vehicle chassis or the body. If necessary,
replace the defective power cable.
The fuse is apparently okay
Use a standard 12 volt voltmeter to check the voltage between the + 12V connection and the ground
connection on the amplifier.
• There is no voltage.
Use the voltmeter to check the fuse, which is located close to the additional battery, to see whether
there is voltage between the output and ground.
If there is no voltage there, either the fuse holder or the fuse is defective, although it appears to be
okay. If necessary, replace the fuse holder or fuse.
• There is voltage.
If you operate the amplifier with a pre-amplifier signal (RCA), you must have laid a remote turn-on
wire from the head unit to the REM terminal of the amplifier.
A remote turn-on wire is connected to the REM terminal at the amplifier.
Use the voltmeter to check whether there is voltage between the REM terminal of the amplifier and
ground. The head unit must be switched on.
There is no voltage.
• Check the remote turn-on wire from the amplifier to the head unit for a short circuit or damage.
If necessary, replace the control line..
There is voltage.
• The amplifier is probably malfunctioning or defective. Contact your retailer.
22
ENGLISH