Dometic Oceanair Skyscreen Powered Montage- Und Bedienungsanleitung Seite 14

Installation
Key to wiring diagrams
Pos.
1
2
3
4
5
bk
rd
gy
wh
I
NOTE
Observe the applicable documents for the controls and the operating ele-
ments.
7.2 Frame fitting
A
NOTICE! Damage hazard
• Use packing material where required (fig. 3, page 4). The side tracks must
be perpendicular to the head rail.
• Use screws and plugs suitable for the wall construction to fix the frame to
the recess. Pre-drill at the marked points.
• Ensure not to drill through the wall.
Proceed as shown (fig. 4, page 4):
1. Align the blind with the window cut-out and mark where the holes are to be
drilled for the frame.
2. Fix the frame with the screws to the ceiling.
3. Check whether the moving rail is square and moves freely.
7.3 Cover fitting (optional)
➤ Proceed as shown (fig. 5, page 5).
14
Description
Fused 12 Vg/24 Vg power supply (fuse rating 2 A for 24 Vg, 1 A for
12 Vg)
Head rail
Head rail motor options
External receiver
Customer supplied DPDTswitch (double pole, double throw), center off,
latching or momentary, 12 Vg/24 Vg, 3 A)
Black
Red
Gray
White
Skyscreen Powered
EN