Beko ATP8100 Benutzerhandbuch Seite 18

7 Troubleshooting
Fault description
Why the machine goes into the
sleep mode, i.e. all indicator
lights are gone out, under the
environment in which the light
is on or the room has other light
source at night?
Why the machine does not
go into the sleep mode, i.e. all
indicator lights are gone out,
under the environment in which
the light is off at night?
18 / EN
Possible reasons
The machine may be placed at
the corner with dark light.
The machine does not run in the
Auto mode.
The machine cannot go into
the sleep mode due to bright
outdoor light coming into the
room from door and window.
The reminding indicator light of
replacing filter screen is on.
Solution
The machine should be placed
at the position with bright light.
Select the Auto mode to make
the machine run in the Auto
mode.
Block the light source: e.g. close
door and window, and draw the
curtain, etc.
After replacing the filter screen,
press the air speed/reset button
for 5 seconds to turn off the
reminding function of replacing
the filter screen. Otherwise,
the sensitivity of the built-in
photosensitive sensor may be
affected, and the machine may
not go into the sleep mode in
the intelligent mode.
Air purifier / User Manual