Cleaning And Maintenance - Beko ATP8100 Benutzerhandbuch

5

Cleaning and maintenance

1. Clean front cover and machine exterior
• First, cut off the power supply.
• Clean when necessary.
• When used at a dirty environment, clean more frequently.
• Use a soft rag to wipe the dirty marks off.
• If the dirty marks cannot be removed by wiping with a dry rag, wipe with a rag dipped with neutral
household detergent and do not use the machine until it is completely dried.
• Follow the instructions when maintaining the filter components. Otherwise, you may impair the
performance of the air purifier.
• Dismantle the machine by following the method specified in the instructions and install it after
maintenance according to the correct guidance.
C
Note: Do not wash it with hot water or expose it under sun.
• When cleaning the dust-collecting HEPA Filter, put it on newspaper or any other protective object
and clean its front cover with a brush nozzle or gap nozzle to remove the dust on the surface. Its
back, however, does not require maintenance.
(Don't press the dust-collecting HEPA Filter with excessive force so to avoid any deformation. Clean
it once every 2 weeks. Don't wash with water.)
• The above operation will extend the service life of filter components. When the filter screen or HEPA
indicator light is on, user should go to the designated centre to buy a new filter and replace the old
one by using proper method.
• Please disassembly and assembly as per correct instruction or guide listed in the manual.
Air purifier / User Manual
15 / EN