Connecting To The App - Xiaomi Roborock S7 MaxV Plus Bedienungsanleitung

B1-5—more than 1.5 m (5ft)
B1-6—more than 0.5 m (1.6ft)
B1-7—more than 1 m (3ft)
Notes:
• The status indicator light turns off automatically when the
robot is charging.
• The status indicator turns red if an error occurs, and turns
off automatically after 10 minutes.
• Do not use without filter, dustbin, cyclone separator, or
dust bag. They are already installed during production.
For details on assembly and cleaning, please refer to the
"Routine Maintenance" section in this manual.
• Place the dock on a flat floor away from fire, heat, and
water. Avoid narrow spaces or locations where the robot
may be suspended in the air.
• Placing the dock on a soft surface (carpet/mat) may cause
the dock to tilt over and cause problems docking and
departing.
• Keep excess power cable inside the storage slot so that the
robot will not get tangled in the cables, and the dock will not
be dragged away or disconnect from the power supply.
• Keep the dock away from direct sunlight or anything that
may block the dock location beacon; otherwise, the robot
may fail to return to the dock.
• The Auto-Empty Dock recharges and empties. Store the
standard robot dock before use. Failure to do so may cause
issues returning to dock.
• Maintain the dock according to the maintenance
instructions. Do not clean the dock with a wet cloth.
Power on and charge the
B2
robot
Press and hold the button to power on
the robot. When the power light goes on,
place it on the dock to charge. To maintain
the performance of the high-performance
lithium-ion rechargeable battery pack, keep
the robot charged.
Note: The robot may not turn on when the battery is low. In
this case, place the robot directly onto the dock to charge.
Mopping
B3
Note: To prevent excessive dirt buildup during first-time
use, floors should be vacuumed at least three times before
mopping.
B3-1—Remove the water tank
Press the water tank latch and slide the tank
backwards.
B3-2—Fill the water tank
Remove the water tank stopper, fill the tank
with water, and close it tightly.
Notes:
• To prevent corrosion or damage, only use the Roborock
branded floor cleaner in the water tank.
• Do not use hot water as this may cause the tank to deform.
B3-3—Reinstall the water tank
Slide the water tank into the robot until you
hear it lock with a click.
B3-4—Install the VibraRise mop cloth
Dampen the mop cloth and wring it until it
stops dripping. Insert it into the bottom
along the attachment slot and stick it firmly
in place.
B3-5—Install the mop bracket
Slide the bracket forwards under the water
tank. A click indicates that it is locked in
place.
B3-6—Remove the mop bracket
When the robot returns to the dock after
cleaning, press the latches on both sides,
and slide the mop bracket backwards to
remove it.
009
Notes:
• Wash the VibraRise mop cloth after each use, and regularly
empty the water tank of unused water.
• Remove the mop bracket when not mopping. The water
tank can stay in place.
WARNING
B3-7—
Risk of injury. Do not place your finger
between VibraRise mop bracket and water
tank.

Connecting to the App

This robot supports both Roborock and
Xiaomi Home apps. Choose the one that
best meets your needs.
❶ Download App
Option 1: Search for "Roborock" in the App
Store or Google Play or scan the QR code to
download and install the app.
Option 2: Search for "Xiaomi Home" in the
App Store or Google Play or scan the QR
code to download and install the app.