Operation
Make sure your device stands upright in a balanced, smooth,
clean, dry and non-slip surface. There are non-slip feet at the
bottom of the machine.
1. Plug in the appliance.
2. Open the water tank and filter cover and fill the tank with
fresh and clean water up to the top water level mark.
3. Add desired amount of ground coffee into the filter.
4. Close the cap.
5. Place the cup in the housing.
6. Press the start button. The coffee brewing process will start
after the power light on the side turns on.
7. The power light will go out when the brewing process is
completed. When this process is complete, you can take
your cup out of the chamber as your filter coffee served in
it.
8. Unplug the appliance out of the outlet when not in use.
Safety System
• The appliance switches off automatically after the coffee
brewing process is complete.
• Protection
against
appliance operates without water in it, the thermostat
will be activated and it will shut off the water heater by
de-energizing your water boiler. In such a case, unplug
the appliance and wait for your appliance to cool down.
Cleaning and Maintenance
• Always unplug your appliance and wait for it to cool down
before cleaning..
• You can hand wash the cup, filter and filter holder of your
operating
without
43
EN
water:
If
the