Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance; Spare Parts - Wolf Garten 2.32 E-1 Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Emptying the collection basket
As soon as the collection basket is full, the cover of the level
O
indicator goes down
If the collection basket is empty, the cover is pushed upwards
when the motor is running

Maintenance

General
1
Caution! Rotating cutters
Before all maintenance and cleaning tasks:
Pull the mains plug out.
Take care not to grab running cutters.
Cleaning
Always clean the lawnmower after each use with a handbrush.
Simply stand it vertically on the collection basket.
Never spray the mower with water.
Storage
Fold the grab handle in order to save space when storing
The design of the 2.32 E-1 allows it to be stood vertically on
Q
the collection basket
At the end of each mowing season, you should perform a
complete cleaning operation on the mower.

Spare parts

Ordering Number
4905 034
4905 096
14
O
(1).
O
(2).
.
Designation of the item
Vi 32 S
1
Caution! Rotating cutters
Settings only to be carried out on the mower with the motor
switched off and with the cutting tools at a standstill.
Switch the motor off and pull the plug out from the mains.
Empty the collection basket.
Before starting, remove any blockages in the mowing
area.
3
Note concerning level indicator
In order to ensure that the level indicator operates correctly,
the holes under the level indicator should be cleaned out re-
gularly using a handbrush.
The mower should be checked by a WOLF customer service
workshop in the autumn.
Store the mower in a dry room.
Changing the cutters
When performing any work on the cutters, coupling and cutter
beam, pull the plug out and wear protective gloves.
1
Caution!
After the cutters have been sharpened there could be imba-
lance.
Always have the cutters sharpened by a specialist work-
shop, since a balance test in accordance with the safety
regulations must be carried out.
Always have the cutters changed by a specialist workshop. A
10 mm torque wrench is an absolute must.
P
.
Torque for tightening the bolts: 6 - 7 Nm
Use only original WOLF spare parts.
R
R
.
Description of the item
Complete grass collecting basket
Cutter beam 32 cm
G

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis