Overmax X-Wave Bedienungsanleitung Seite 16

5. Power cord
6. Lug wrench
7.
Screwdriver
EN The power adapter is not supplied. Use the power supply of the following
parameters: 5V
2. Plug connection diagram (see fig. 2):
1.
LED's plug
2. Controller's plug
3. Motor's plug
4. Battery's plug
5. On/off switch and power indicator
3. How to pair controller with car (see fig. 3):
•
Slide the switch on the car into „ON" to activate the vehicle.
•
Slide the controller's switch into „ON". Power LED will go on.
•
If the LED fails to go on, check the controller's batteries for suitable condition
and proper assembly.
•
Wait for about 15 seconds until the controller has connected to the car.
4. Description of controller (see fig. 4):
1.
Turn left
2. Turn right
3. Forward
4. Brake/Reverse
5. Acceleration adjustment
6. Reversed direction of throttling valve operation
7.
On/Off switch
8. Reversed direction of control knob operation
9. Power/connection LED
1A