Interline 59695305 Bedienungsanleitung Seite 37

Consult your dealer for installing the heat pump.
• It should not be installed by the user since installation requires specialized knowledge and skills.
An improperly installed heat pump may cause water leakage, fire, or electric shock.
Provide a dedicated power supply for the heat pump.
• A non-dedicated power supply may cause overheating or fire.
Do not install the unit where flammable gas could leak.
• If gas leaks and accumulates around the unit, it may cause an explosion.
Earth the unit correctly.
• Do not connect the earth wire to a gas pipe, water pipe, lightning
rod, or a telephone ground wire. Improper earthing may cause electric shock.
Above parameters is only for reference, exact details please as per nameplate.
Install an earth leakage breaker depending on the installation
Above parameters is only for reference, exact details please as per nameplate.
location of the heat pump (such as highly humid areas).
• If an earth leakage breaker is not installed, it may cause electric shock.
2.2 Dimension of swimming pool heat pump unit
Ensure that the drain water is properly drained.
• If the drain passage is improper, water may drip down from the
unit, wetting and damaging the furniture.
Please prepare the professional tools for R32 refrigerant heat pump before you do maintenance.
R32 leak
detector
ATTE N TI ON:
Please observe the following rules when installing the heat pump:
1. Any addition of chemicals must take place in the piping located downstream from the heat
pump.
2. Always place the heat pump on a solid foundation and use the included rubber mounts to
avoid vibration and noise.
3. Always hold the heat pump upright. If the unit has been held at an angle, wait at least 24
hours before starting the heat pump.
WARNING
Explosion
-proof
vacuum
pump
EN EN
Anti-
static
gloves
9