Steering Wheel Control; Sound Settings; Equalizer; Volume Distribution (Fader/Balance) - Blaupunkt ADAYO 590 Serie Bedienungsanleitung

a rear camera is connected, the image is displayed on the
screen, when the rear gear is engaged.

Steering wheel control

Select [ SWC ] on the General Settings menu to enter
SWC setting menu.
Touch number button to select a SWC button.
Select a function.
Press each individual steering wheel control button
for each corresponding function.
Touch [ ] to program.
Once the final steering wheel control button is pro-
grammed, the functions are saved and the program-
ming will end.
Touch [ ] to reset he programming.

Sound settings

Equalizer

You can adjust the equalizer for all sources.
Press the [ ] icon on the main menu , or press
[ ] on the control bar of the current audio
source.
The equalizer menu is displayed.
Select a preset equalizer via the buttons.
- Or -
Press the [ Customize ] button to adjust the level
of the available frequency bands according to your
preferences.
36
All manuals and user guides at all-guides.com
Steering wheel control | Sound settings
Note:
With the [ Original ] button, you can reset the cus-
tomised setting again.
- Or -
Press the [ Loudness ] button to switch increasing
the bass at low volume on or off.

Volume distribution (fader/balance)

You can adjust the volume distribution in the vehicle
for all sources.
Press the [ ] button in EQ menu.
The menu for fader and balance is displayed.
Adjust fader and balance with [
[ ] / [ ].
Press [ ] / [ ] under the "Sub" to adjust the Sub-
woofer.

Basic settings

In the settings menu, you can adjust the basic settings
for the different functions of the device to your require-
ments.
In the main menu, press the [
The settings menu is displayed, the General sub-
menu is activated.
Call up the submenus with the buttons in the lower
area of the settings menu.

General

The following settings are possible:
] / [ ] or
] button.